2.0 Stage 1 Shortblock Package +650WHP

Big Savings!

SKU: 0099 Category:


JAM shortblock packages offer the ultimate in performance and longevity. Whether you’re building a killer street car or a wicked track monster, our shortblocks fit the bill. Every block is thoroughly inspected to verify it’s integrity. They are then precision machined in house using state of the art tooling and methods then filled with only the best components available. Every engine is custom built to order which ensures that it fulfills the customers’ goals.

The following services are performed to prepare your block for use:

  • The block is completely disassembled and hot tanked
  • It is visually inspected
  • All threads are checked
  • ARP main studs are installed
  • The align bore is checked and recorded
  • The cylinders are sonic tested for thickness
  • The block is then square decked
  • The block is bored
  • The bores are plate honed
  • The block is thoroughly washed for final assembly
  • The crank is fully cleaned, magnaflux inspected, shot peened and micro-polished
  • The rotating assembly is precision balanced
  • New freeze plugs and galley plugs are installed
  • Your piston oilers are installed
  • The piston rings are file fit to each cylinder
  • All clearances are ¬†checked and recorded- rod and main bearings, rod side clearance, rod and piston pin-fit and deck heights
  • The rotating assembly is then installed into the machined block.

JAM Stage 1 package +650whp

Our Stage 1 shortblock comes to you fully assembled with the following components

  • Forged steel crankshaft, 88mm
  • Manley H-Beam rods with ARP 2000 bolts
  • Wiseco forged pistons, 85.5mm, 9.1:1or 8.5:1 cr
  • Precision balanced as an assembly
  • ARP main studs
  • ¬†ACL rod and main bearings
  • Performance coated Thrust Washer set (7 bolt only)
  • JAM-7 piece Balance Shaft Elimination kit

Options include:

  • ARP 11mm Head Stud Kit
  • JAM Spec-Oil Pump/Front Cover Kit
  • OEM MLS Head Gkt
  • Cometic MLS Head Gkt
  • O-Rings
  • Wiseco HD 1400 pistons
  • Eagle or Manley crankshaft

*Please note: ***GOOD CORES ARE REQUIRED*** Additional core charge for EVO blocks of $1875 (price includes usable block, crank, balance shafts, complete oil squirter assemblies) will apply if you do not supply us with a core for your build. If the crank is not usable, an additional charge of $625 will be applied. We must receive your core before your order ships otherwise you will be charged the core fees on the shipping date. We will refund these fees upon receipt of a usable core within 30 days. Core charge for DSM blocks is $400 and cranks is $200.

Additional information

Weight 185 lbs











, ,